Where Earthmovers Go to Grow

Arrow-white Why use Cast Technology in excavator Attachments?


Sep 27, 2018

| |
3 mins read

Cast technology has been around for centuries as an effective manufacturing tool. We are covering the top 5 reasons why cast technology is an effective way of producing parts for buckets and attachments for diggers.

You remember those cool model cars you use to collect as a kid and no doubt played with (you might not of stopped collecting.. we haven't!) This was most likely your first introduction to something cast. A die-cast model.

Die-Cast Toy Digger Excavator

Casting is often used to make complex shapes that would otherwise be difficult or overly expensive to produce using other methods. There are several types of casting methods in manufacturing like die-cast, sand casting and investment casting to name a few of the most popular. Each have their own distinct uses based on what needs producing.

We use Investment Casting to produce the shapes we need for our products. Investment casting, it is estimated to if been in use for some 5,000 years. It may sound like it's and old-school method; but it has numerous benefits for our application and is why it is used for the manufacture of aircraft and high wear dependent parts. Although more expensive that other cast methods, it can produce complicated shapes other methods can not and requires little surface finishing and machining. Important characteristics when producing parts with only point millimetre tolerances.

1. Design Flexibility

Parts and shapes can be produced with more complexity and features than can be produced using a traditional manufacturing 2d process then welding and fitting. This means shapes that would ordinarily be impossible to make are easy to produce and of higher quality due to their complex design than fabrication.

2. Extra Strong

These Shapes and Parts are exceptionally strong as they have no fabrication welds as potential weaknesses. And no extra heat is introduced to the metal keeping it's original temper.

3. Lighter

Engineers can design parts and shapes to remove redundant material and be made thinner giving noticeable weight savings without any loss of functional strength. They also benefit from compactness and balance with the minimisation of material needed, an important benefit for hitches.

4. Exact

Since shapes are produced from a precisely made master pattern (the part you are copying) they benefit from low margin of error in parts that require exacting tolerances. Like hitch jaws and pin positioning. Only faces need machining to guarantee fit.

5. Aesthetics

They look better! Aesthetically speaking these shapes and parts look better as there are no welds and have a good surface finish making it look even better painted.

Which A2 products use cast technology?

All our hitches take advantage of cast technology. Especially in areas like the jaw and contact points which require both strength, compactness and a complex shape to ensure a strong connection.

Cast Part

Attach2 Insider excavator attachments Product Explainer

Simon joined the Attach2 team in 2018 and is well known for pointing a big camera around in addition to typing, lots of typing. He has a varied background in construction and management and is passionate about using his experiences to see businesses succeed through excellent visual and text-based communications. And yes Simon wrote this in 3rd person about himself."

Related Post

Customer Profile: Sierra Delta

Sierra Delta Civil was born when the next generation stepped in and picked up where the last generation left off.

Read More

Customer Profile: SJT Earthmoving


Read More

How the Double Radius Wrap affects digging performance.

There have been quite a few developments in the industry of attachment manufacturing that seek to aid operators in becoming..

Read More